NORWOOD, MA, UNITED STATES, February 27, 2025 /ennovaterz/ — Advanced Thermal Solutions, Inc. (ATS) has introduced a line of liquid-cooled cold plates that provide equal cooling performance for components mounted on both sides of the plate, increasing efficiency, space savings and economy. The cold plates can be used with coolant flow rates up to 4 gal/min, and provide thermal resistance as low as 0.0021°C/W.
The cold plates are available in five sizes, ranging from 3.0 x 5.2 inches to 13.4 x 9.7 inches. Their standard width is 0.9 inch. Their flat, component-mounting areas comprise most of the space on each side, the rest are no drill strips above the high flow channels. Each cold plate is etched with “No Drill Zones” on both sides, providing a visual guide for safe mounting schemes.
These cold plates are made from aluminum with unfinished surfaces and provide uniform cold plate temperatures with optimized fluid flow paths to effectively remove component heat. The cold plates are rated at 100 psi maximum operating pressure. All cold plates have ¼ inch NPT threaded inlet and outlet ports to work with a wide range of coolant pumping systems.
ATS is a world leading provider of cold plates. In addition to these standard dual-sided cold plates, custom versions can be developed in different sizes and materials.
ATS provides devices for all stages of liquid cooling loops, including heat exchangers, cold plates, chillers, leak detectors and flow meters. The ATS plug and play iCDM system replaces all components of a liquid cooling loop with a portable, easy to run unit. After connecting to a cold plate, the iCDM is filled with coolant and the flow rate is adjusted to the target cooling performance.
